Metering Range

With a communication module (sold separately), a 38.4kb/s max baud rate system sends meter readings a statistics to a nearby computer (via the RS232 cable). We also offer DIN rail timing devices.

  • RI-F200

    RI-F200 Series | Grey Single & Three Phase Multifunction Energy Meter

    £86.50 Ex VAT

    Grey Raleigh Instruments RI-F200 Series Single & Three Phase Multifunction Energy Meter

    Product Description

    The RI-F200 series are a range of DIN 96 panel mounted multifunction energy meters. Suitable for monitoring energy consumption and many other electrical parameters in industrial and commercial applications.These meters may be used in single or three phase balanced or unbalanced load systems. A high efficiency white backlit LCD display provides a clear indication of the measured value in all light conditions. Quick select push-buttons on the front of the meter allow the user fast access to the display page required.
    The meter is available in three versions:
    • With single pulse output.
    • With single pulse output and RS485 Modbus communication.
    • With single pulse output and Mbus communication.
    The unit is housed in a compact DIN 96 case suitable for panel mounting

    Displayed Parameters

    • Voltage – L-L, L-N and average
    • Current – Phase, total and Max. demand
    • Power Factor – per phase and average
    • Total Harmonic Distortion – Current and Voltage
    • Neutral current (calculated)
    • Frequency
    • Hours Run – Hours & minutes
    • Power – Active, Reactive and Apparent (per phase and total)
    • Power Min. /Max. demand – Active, reactive and apparent.
    • Energy – Active, reactive and apparent (per phase and total)
    • Import and export energy – Active, Reactive and Apparent (per phase and total)

    Display

    Display Type
    • High definition white backlit LCD
    Digit Height
    • 11.2mm (displayed parameter)
    • 6.35mm (lowest 8 digits)
    Page scrolling
    • Manual by front key / or auto scroll mode
    Displayed parameters and accuracies
    Voltage: 0.5% of full scale
    Current: 0.5% of full scale
    Frequency: 0.1% of full scale (L – N >20V)
    Power factor: 1% of unity
    Active power: 1%
    Reactive power: 1%
    Apparent power: 1%
    Active Energy: Class 1 (IEC/EN62053-21)
    Reactive Energy: Class 2 (IEC/EN62053-23)
    Total Harmonic Distortion (THD): 3%
    Energy maximum display
    • 99999999
    Resolution
    • 0.01K, 0.1K, 1K, 0.01M, 0.1M, 1M (depending on CT ratio & VT ratio)
     

    Programming

    Parameters that can be changed using programming menu
    CT Primary current
    CT Secondary current
    VT primary voltage
    VT secondary voltage
    Communication address
    Communication speed (Baud)
    Communication Parity
    Communication number of stop bits
    Back-light time-out period
    Demand period (for integration)
    Pulse output (kWh)
    Pulse duration
    Reset to Factory Default
    Reset Energy and Maximum Demand
    Reset Active Energy
    Reset Reactive Energy
    Reset Apparent Energy
    Reset Maximum Current
    Reset Maximum Active Power
    Reset Minimum Active Power
    Reset Maximum Reactive Power
    Reset Minimum Reactive Power
    Reset Maximum Apparent Power
    Programming access
    Password protected (user selectable)
    Memory retention
    Non volatile memory
     

    Input

    Connection: Single phase (selectable L1, L2 or L3 CT connection), Three phase three wire, Three phase four wire
    Input voltage range: 11…300V (L – N), 19…519V (L – L)
    Voltage Rated Burden: 0.2VA
    Nominal current input: 1A , 5A
    Max current (Imax): 1.2A, 6A (1.2 x Nominal)
    Current Rated Burden: 0.5VA
    Starting current: 11m A
    Short time over-current: 30 x Imax to IEC/EN62053-21 + 23
    Impulse voltage withstand: 6kV 1.2/50μS 0.5J
    AC voltage withstand: 4kV 50Hz for 1 min.
    CT primary current: 1A, 5A…10000A
    VT primary voltage: 100…500KV
    Frequency: 45…65Hz
     

    Auxiliary Supply

    Voltage range: 100…240V (+/-15%)
    Operating frequency: 45…65Hz
    Power consumption: < 8VA

    Outputs

    Energy pulses
    Number of pulse outputs: 1
    Pulse output function: kWh
    Pulse output type: Semiconductor (does not support volt-free operation)
    Pulse output Max. current: 100mA
    Pulse output voltage range: 5…27VDC
    Pulse duration: 100ms…2s
    Pulse resolution: 0.01K, 0.1K, 1K, 0.01M, 0.1M, 1M (depending on CT ratio & VT ratio)
     

    Communication

    Communication type: RS485
    Communication protocol: Modbus (Mbus upon request)
    Address: 1…255
    Number of bits: 8bits
    Parity: None, odd, even
    Baud rate: 300, 600, 1200, 2400, 4800, 9600, 19200
    Required response time to request: ≤100ms
    Number of meters connected on the bus: 32 (up to 255 with RS485 repeater)
    Max distance from Master device: 500M
     

    Insulation

    Installation category: III
    Pollution degree: 2
    Insulation voltage rating: 300V (L – N)
     

    Environmental Conditions

    Reference temperature: 23°C ±2°C
    Specified temperature operating range: –10°C…+55°C
    Storage temperature: –20°C…+70°C
    Relative humidity: 0…85%, non-condensing
     

    Mechanical

    Housing
    Housing: DIN96
    Mounting: Panel mounted (Max. panel thickness 6mm)
    Tamper sealing: Meter housing (by means of a tamper evident seal). Terminal covers are available
    Housing material: Self-extinguishing polycarbonate (UL94 V-0)
    Protection degree: (IEC/EN60529) IP20 (terminals), IP54 (front of housing)
    Weight: <320g

    Termination

    Current input terminal type: Screw clamp type
    Max. wire size: 2.5mm
    Voltage input terminal type: Screw clamp type
    Max. wire size: 2.5mm
    Output terminal type: Screw clamp type
    Max. wire size: 2.5mm

    Conformity

    Electromagnetic compatibility: IEC/EN61326-1, IEC/EN55011 Class A, IEC/EN61000-4-2, -3, -4, -5, -6, -8, -11
    Accuracy and functionality: IEC/EN62053-21, IEC/EN62053-23
    Safety: IEC / EN61010
     

    Model Selection Table

    Pulse output: RI-F200-P
    Modbus and pulse output: RI-F200-C
    M-Bus and pulse output: RI-F200-MB
    Add to basket Show details
  • RI-F200

    RI-F200 Series | Black Single & Three Phase Multifunction Energy Meter

    £86.50 Ex VAT

    Black Raleigh Instruments RI-F200 Series Single & Three Phase Multifunction Energy Meter

    Product Description

    The RI-F200 series are a range of DIN 96 panel mounted multifunction energy meters. Suitable for monitoring energy consumption and many other electrical parameters in industrial and commercial applications.These meters may be used in single or three phase balanced or unbalanced load systems. A high efficiency white backlit LCD display provides a clear indication of the measured value in all light conditions. Quick select push-buttons on the front of the meter allow the user fast access to the display page required.
    The meter is available in three versions:
    • With single pulse output.
    • With single pulse output and RS485 Modbus communication.
    • With single pulse output and Mbus communication.
    The unit is housed in a compact DIN 96 case suitable for panel mounting

    Displayed Parameters

    • Voltage – L-L, L-N and average
    • Current – Phase, total and Max. demand
    • Power Factor – per phase and average
    • Total Harmonic Distortion – Current and Voltage
    • Neutral current (calculated)
    • Frequency
    • Hours Run – Hours & minutes
    • Power – Active, Reactive and Apparent (per phase and total)
    • Power Min. /Max. demand – Active, reactive and apparent.
    • Energy – Active, reactive and apparent (per phase and total)
    • Import and export energy – Active, Reactive and Apparent (per phase and total)

    Display

    Display Type
    • High definition white backlit LCD
    Digit Height
    • 11.2mm (displayed parameter)
    • 6.35mm (lowest 8 digits)
    Page scrolling
    • Manual by front key / or auto scroll mode
    Displayed parameters and accuracies
    Voltage: 0.5% of full scale
    Current: 0.5% of full scale
    Frequency: 0.1% of full scale (L – N >20V)
    Power factor: 1% of unity
    Active power: 1%
    Reactive power: 1%
    Apparent power: 1%
    Active Energy: Class 1 (IEC/EN62053-21)
    Reactive Energy: Class 2 (IEC/EN62053-23)
    Total Harmonic Distortion (THD): 3%
    Energy maximum display
    • 99999999
    Resolution
    • 0.01K, 0.1K, 1K, 0.01M, 0.1M, 1M (depending on CT ratio & VT ratio)
     

    Programming

    Parameters that can be changed using programming menu
    CT Primary current
    CT Secondary current
    VT primary voltage
    VT secondary voltage
    Communication address
    Communication speed (Baud)
    Communication Parity
    Communication number of stop bits
    Back-light time-out period
    Demand period (for integration)
    Pulse output (kWh)
    Pulse duration
    Reset to Factory Default
    Reset Energy and Maximum Demand
    Reset Active Energy
    Reset Reactive Energy
    Reset Apparent Energy
    Reset Maximum Current
    Reset Maximum Active Power
    Reset Minimum Active Power
    Reset Maximum Reactive Power
    Reset Minimum Reactive Power
    Reset Maximum Apparent Power
    Programming access
    Password protected (user selectable)
    Memory retention
    Non volatile memory
     

    Input

    Connection: Single phase (selectable L1, L2 or L3 CT connection), Three phase three wire, Three phase four wire
    Input voltage range: 11…300V (L – N), 19…519V (L – L)
    Voltage Rated Burden: 0.2VA
    Nominal current input: 1A , 5A
    Max current (Imax): 1.2A, 6A (1.2 x Nominal)
    Current Rated Burden: 0.5VA
    Starting current: 11m A
    Short time over-current: 30 x Imax to IEC/EN62053-21 + 23
    Impulse voltage withstand: 6kV 1.2/50μS 0.5J
    AC voltage withstand: 4kV 50Hz for 1 min.
    CT primary current: 1A, 5A…10000A
    VT primary voltage: 100…500KV
    Frequency: 45…65Hz
     

    Auxiliary Supply

    Voltage range: 100…240V (+/-15%)
    Operating frequency: 45…65Hz
    Power consumption: < 8VA

    Outputs

    Energy pulses
    Number of pulse outputs: 1
    Pulse output function: kWh
    Pulse output type: Semiconductor (does not support volt-free operation)
    Pulse output Max. current: 100mA
    Pulse output voltage range: 5…27VDC
    Pulse duration: 100ms…2s
    Pulse resolution: 0.01K, 0.1K, 1K, 0.01M, 0.1M, 1M (depending on CT ratio & VT ratio)
     

    Communication

    Communication type: RS485
    Communication protocol: Modbus (Mbus upon request)
    Address: 1…255
    Number of bits: 8bits
    Parity: None, odd, even
    Baud rate: 300, 600, 1200, 2400, 4800, 9600, 19200
    Required response time to request: ≤100ms
    Number of meters connected on the bus: 32 (up to 255 with RS485 repeater)
    Max distance from Master device: 500M
     

    Insulation

    Installation category: III
    Pollution degree: 2
    Insulation voltage rating: 300V (L – N)
     

    Environmental Conditions

    Reference temperature: 23°C ±2°C
    Specified temperature operating range: –10°C…+55°C
    Storage temperature: –20°C…+70°C
    Relative humidity: 0…85%, non-condensing
     

    Mechanical

    Housing
    Housing: DIN96
    Mounting: Panel mounted (Max. panel thickness 6mm)
    Tamper sealing: Meter housing (by means of a tamper evident seal). Terminal covers are available
    Housing material: Self-extinguishing polycarbonate (UL94 V-0)
    Protection degree: (IEC/EN60529) IP20 (terminals), IP54 (front of housing)
    Weight: <320g

    Termination

    Current input terminal type: Screw clamp type
    Max. wire size: 2.5mm
    Voltage input terminal type: Screw clamp type
    Max. wire size: 2.5mm
    Output terminal type: Screw clamp type
    Max. wire size: 2.5mm

    Conformity

    Electromagnetic compatibility: IEC/EN61326-1, IEC/EN55011 Class A, IEC/EN61000-4-2, -3, -4, -5, -6, -8, -11
    Accuracy and functionality: IEC/EN62053-21, IEC/EN62053-23
    Safety: IEC / EN61010
     

    Model Selection Table

    Pulse output: RI-F200-P
    Modbus and pulse output: RI-F200-C
    M-Bus and pulse output: RI-F200-MB
    Add to basket Show details